General Introduction of Adhesive Coating Machine
500B Adhesive Coating Machine can make adhesive tapes from raw material to finished tapes by
one step, including printing letters, coating glue, drying glue, slitting tapes and rewinding tapes, all these processes need 1 operator only.
It is a wise choice for household investment. For packing tapes belong to fast moving consumer goods which are variously used in many industries, so there is a big potential consumption market for adhesive tape making machine.
Features of Adhesive Coating Machine
1. Power system: using 1 motor to produce more steady and excellent working ability.
2. Printing: gravure printing mould with 2 colors.
3. Coating glue: thickness of glue can be adjustable
4. Drying part: One way drying system with draught fans to guarantee the hot air circulation in the oven.
5. Automatic temperature control: When the temperature meets the temperature it will stop
heating, when it becomes lower, it will start working again.
6. 2 shafts which can change consecutively without any stop during operation.
7. Electronic correction system to help the film walking in right direction automatically
Technical Parameters of Adhesive Coating Machine
|
Machine type:
|
Oven heating
|
Reference temperature:
|
Interior: The Min.10degree C is calculated as the standard
|
|
Substrate width:
|
500mm
|
Oven temperature:
|
Maximum 130 ℃
|
|
Coating width:
|
500mm
|
Drying method:
|
Steam, electric heating (according to customer requirements)
|
|
Base diameter:
|
800mm
|
Unwinding way:
|
Single-station unwinding
|
|
Glue:
|
Water-based pressure sensitive adhesives
|
Winding way:
|
Biaxial exchange rewinding
|
|
Base:
|
BOPP film
|
Host power:
|
3-phase, 380V,50Hz
|
|
The way of glue :
|
Scraper gluing
|
Total power:
|
10KW
|
|
Glue viscosity:
|
50-150cps
|
Bake length:
|
6M
|
|
Mechanical speed:
|
2-30M/min.
|
Equipment size:
|
7.6M*1M*2.4M
|
|
Coating speed
|
10-18M/min
|
Amount of labor:
|
1-2
|
