General Introduction of Adhesive Tape Making Machine
500D Adhesive Coating Machine can make adhesive tapes from raw material to finished products
by one step, including printing letters, coating glue, drying glue, slitting tapes and rewinding tapes, all these processes need 1 operator only.
Features of Adhesive Tape Making Machine
1. GL-500D adhesive tape making machine is our newly design with more advanced and efficient
system.
2. Power system: using 2 motors to produce more steady and excellent working ability.
3. Printing: gravure printing mould with 2 colors
4. Automatic coating glue: thickness of glue can be adjustable and seen on a testing watch to
show accurate gluing.
5. Drying part: two ways drying system with draught fans to guarantee the hot air circulation in the oven.
6. Automatic temperature control: When the temperature reach the required temperature , it will
stop heating, later if it become lower, the oven starts working again.
7. 4 shafts which can change consecutively without any stop in operation.
8. Electronic correction system to help the film walking in right direction automatically
Technical Parameters of Adhesive Tape Making Machine
|
Machine type:
|
Adhesive Tape Making Machine
|
Reference temperature:
|
Interior: The Min.10degree C is calculated as the standard
|
|
Substrate width:
|
500mm
|
Oven temperature:
|
Maximum 130 ℃
|
|
Coating width:
|
500mm
|
Drying method:
|
Steam, electric heating (according to customer requirements)
|
|
Substrate diameter:
|
800mm
|
Unwinding way:
|
Single-station unwinding
|
|
Glue:
|
Water-based pressure sensitive adhesives
|
Winding way:
|
Biaxial exchange rewinding
|
|
Base:
|
BOPP film
|
Host power:
|
3-phase, 380V,50Hz
|
|
Glue Type
|
Scraper gluing
|
Total power:
|
18KW
|
|
Glue viscosity:
|
50-150cps
|
Bake length:
|
6M
|
|
Mechanical speed:
|
2-30M/min.
|
Equipment size:
|
7.6M*1.3M*2.6M
|
|
Coating machinespeed
|
10-25M/min
|
Amount of labor:
|
1-2
|
