Applications of Tape Cutting Machine
Adhesive Tape Cutting Machine is suitable for cutting PVC, OPP, PE, textured paper, double-sided tape, kraft paper tape, cloth, foam, etc.
Features of Adhesive Tape Cutting Machine
1, the host transmission section : By AC motor with inverter drive as cutting roll material, acceleration and deceleration are steady and rapid. The central control unit: use of a central process control, coaxial can set a variety of sizes (up to 20 modes). Automatic conversion cut-off, so that unattended operation .
2, the operation panel portion: Operator interface with LCD touch screen, you can set various cutting conditions and operating conditions directly on the screen.
3, the motor control system: Central control system is PLC programmable controller, coaxial can set variety sizes , the computer adjusts the cutting width automatically .
4, positioning system of cutting roll: Use servo motor control, high-precision Imported ball screw to locate size , linear slide bearing knife, smooth precise positioning operation.
5. positioning system of feeding: Feeding with servo motor control method, may be overtaken by three-speed into anthropomorphic knife roll, increase efficiency and get the best quality.
Technical parameters of Tape Cutting Machine
Machine width
|
1m,1.3m,1.6m
|
Cutting accuracy
|
±0.05mm
|
outer diameter of cutting tube core
|
1"-3"
|
Maximum diameter of cutting roll
|
¢200mm
|
minimum width of cutting roll
|
2 mm
|
Diameter of round cutter
|
¢180-¢300
|